Up to 2,500 sq. ft. $350
2,501-3,000 sq. ft. $375
3,001-3,500 sq. ft. $400
3,500 sq. ft.+ $.135 per sq. ft.
Additional features may incur additional charges. E.g.: 2nd kitchen, additional or commercial HVAC systems, fireplaces, etc.

Average 1-2 car garage when there is no attached garage.
(See Outbuildings for shops and oversized garage pricing.)

Up to 2,500 sq. ft. $450
2,501-3,000 sq. ft. $475
3,001-3,500 sq. ft. $500
3,500 sq. ft.+ $.145 per sq. ft.
Additional charges may apply based on square footage, multi-family units, and additional electrical panels and HVAC systems.

Up to 2,500 sq. ft. $275
+$25 per additional 500 sq. ft.

Per additional unit. (Does not include the square footage charge.) Covers additional kitchens, baths, HVAC, and electrical panels.

Up to 10 items. Additional items are $10 each. A travel fee may apply.
We return to the home with your inspection notice to verify that your requested repairs were completed properly. Findings are provided in a mini-PDF report that includes pictures of any incomplete or unsatisfactory items found.

They'll generally be based on square footage. It could be more or less depending on if it's an empty shed vs. a living space with a bathroom, kitchen, etc.

Commercial septic inspection $500.00
A basic water test is required by the state with a septic inspection if the property is on well water.
The tank MUST be accessible when the inspector arrives or additional trip fees will apply.
Digging services can be set up by StrongHold for a fee.

There is an additional $75 hold in case the tank cannot be accessed once found, to replace the locator beacon. This is refundable as long as the beacon is immediately recovered during the locate.

A basic water test is required by the state with a lagoon inspection if the property is on well water.

Tests for E.coli & Coliform. This test must be sent to a lab and has up to 2 days turnaround.
If a well fails the water test and needs to be retested at a later date, the fee is $160.

Tests for the basic bacteria plus Nitrate, Nitrite, and Lead. This test must be sent to a lab and has up to 10 days turnaround.

Inspect well house, pressure tank & gauges, GPM, wiring, control boxes, etc.

We use machines instead of lab tests. Results can be ready immediately after the 48-hour test is completed!
2 trips are required to set up a radon test and then pick it up without a home or septic inspection, so additional travel fees may apply.

The price for air testing is per sample.
The first test includes an outdoor control sample for comparison. Each additional test is $125
A sample is usually needed on each level of a home or business and covers 1500-2000 sq. ft. depending on the layout.
(Must be sent to a lab and mailing time should be considered.)

2 swabs per kit covers 2 areas.
If lab confirmed results are required, it is $200 for the first sample. $150 each additional sample. This requires a paint chip so the owner must give permission. (Must be sent to a lab and mailing time should be considered.)

$150 each additional sample. We must be able to take a sample without damaging anything.
(Must be sent to a lab and mailing time should be considered.)

Surface swab testing. Instant results.